Tool Library

By lhanneus

An Open-Source Strip-Till realised by students at UniLasalle Polytechnique Beauvais (France) with AgriLab and la chaire d'Agromachinisme et nouvelle technologie

By confluencefarm

I built this bed shaper from an old 2 row cultivator purchased for $200 from craigslist. By adding disc hillers I could hill beds but still had to rake them before seeding or planting. I created this bed shaper from...

By Regrarians

Franck Chevallier has developed a open source subsoiler which is designed to be able to be built by local metal workers using readily available materials.

By ccaissie

Heavy Stirrup design using used municipal equipment cutting edge scrap...grader/plow blade. Requires a heavy frame to mount to 3-pt, and grader blade 'stirrup' must be specially welded to suit the high carbon alloy...usually 1070-1090 steel.

By Marta Di Pierro

Roller crimper developed by organic Latium region farmers (members of AIAB Lazio) together with CREA, a research center. It has been built, developed and tested in a participatory mode.

By Kristen Loria

The tool shown here is a row/bed marker that is rolled out before direct seeding or transplanting. There are two versions documented - a hand-pushed model and a rear tractor-mounted model. It's purpose is to quickly make a grid that...

By DGrover

Finger weeders are a cultivation tool which use ground driven, rubber, star shaped discs to disturb the soil very close to the cultivated crop. Their main advantage is their ability to reach in row weeds. They do not damage the...

By mkinecki

This a root vegetable bedlifter. It was designed by a Local Potsdam farmer and we were tasked with improving the design. It is attached by a three point hitch and is used to dig underneath shallow root vegetables and loosen...

By lonjevityfarms

The disc harrow I have leaves large gullies on each side. So I built this tool to fill in and level out the gullies. It can be mounted on a tool bar or mounted right on the back of my...

By lonjevityfarms

I built this implement to make raised beds. It mounts to my rototiller or a 3 point hitch toolbar. It makes a 36" wide bed adjustable height from 2" to 8".